Hunting rig pictures...trucks, 4-wheelers, etc
Hunting rig pictures...trucks, 4-wheelers, etc
Here is a pic of my hunting set up. I am looking to build a trailer set up for pulling behind my 4 wheeler. Lets see your hunting rigs. I know I am always looking for new ideas so lets see some of the different set ups everyone is using.
-
- Open Mouth
- Posts: 715
- Joined: Tue Jun 26, 2007 8:10 pm
- Location: Utah
Its more of a box picture instead of the rig. I hunt out of 2 trucks so it varies. This is my summer box. It seems to work well. It isn't quite as tall as it looks in this truck. This truck has a tool tray it sits on so it sits 4 inches taller than in my other truck.
Lots of ventilation and it was made for around 150 dollars. It isn't near as heavy as it looks. I load and unload it by myself. Its lighter than my box made out of 1/2' plywood and 2X4's.
Lots of ventilation and it was made for around 150 dollars. It isn't near as heavy as it looks. I load and unload it by myself. Its lighter than my box made out of 1/2' plywood and 2X4's.
-
- Bawl Mouth
- Posts: 205
- Joined: Mon Jun 25, 2007 6:53 pm
- Facebook ID: 0
- Location: washington
-
- Bawl Mouth
- Posts: 185
- Joined: Tue Jun 26, 2007 1:14 am
- Facebook ID: 0
- Location: Idaho
-
- Bawl Mouth
- Posts: 205
- Joined: Mon Jun 25, 2007 6:53 pm
- Facebook ID: 0
- Location: washington
-
- Tight Mouth
- Posts: 127
- Joined: Fri Oct 19, 2007 5:22 pm
- Facebook ID: 0
- Location: Corning, CA
Here is my set up. New truck and new dog box in the same year
I must be living right!!
I had it custom made during the off season when I wasn't in a hurry to use it. $1,243
It is 99% waterproof. The holes cover up with a piece that slides in. Water runs off toward the front and catches in the gutter to run off and down the side of the truck bed not in it. It is set up so you could easily put a floor in it if you wanted to, but so far iI haven't needed to. Pretty good set up, only one problem... It fits on a Dodge half ton bed only!! I guess my next truck is gonna be a Dodge half ton!!
I must be living right!!
I had it custom made during the off season when I wasn't in a hurry to use it. $1,243
It is 99% waterproof. The holes cover up with a piece that slides in. Water runs off toward the front and catches in the gutter to run off and down the side of the truck bed not in it. It is set up so you could easily put a floor in it if you wanted to, but so far iI haven't needed to. Pretty good set up, only one problem... It fits on a Dodge half ton bed only!! I guess my next truck is gonna be a Dodge half ton!!
-
- Posts: 18
- Joined: Fri Jan 18, 2008 8:17 pm
- Facebook ID: 0
- Location: croswell michigan
who did you get to build it?
Honey I'm going to be a little late....
-
- Posts: 18
- Joined: Fri Jan 18, 2008 8:17 pm
- Facebook ID: 0
- Location: croswell michigan
-
- Tight Mouth
- Posts: 127
- Joined: Fri Oct 19, 2007 5:22 pm
- Facebook ID: 0
- Location: Corning, CA
-
- Posts: 18
- Joined: Fri Jan 18, 2008 8:17 pm
- Facebook ID: 0
- Location: croswell michigan
dog box location
just looked at your profile, you couldn't get much further from me in michigan. Guess I will just admire from a distance. Wife would never think me sane again if I drive to cali for a new dog box, no matter how cool it is.
Honey I'm going to be a little late....
-
- Tight Mouth
- Posts: 127
- Joined: Fri Oct 19, 2007 5:22 pm
- Facebook ID: 0
- Location: Corning, CA
-
- Tight Mouth
- Posts: 140
- Joined: Wed Jun 27, 2007 5:55 pm
- Facebook ID: 0
- Location: New Mexico
-
- Bawl Mouth
- Posts: 321
- Joined: Thu Jun 28, 2007 1:23 pm
- Location: maine
- Contact:
Return to “Kennels and Dog Boxes”
Who is online
Users browsing this forum: No registered users and 2 guests