my dog box ideas
Posted: Tue Feb 23, 2010 2:32 pm
hey guys i am working on a dog box made out of two truck tool boxes. i cut the bottom out of one and the bottom and sides out of the other and welded them together. i built doors out of squar tubing. i left the top openable so i can dump without off loading my quad my tool boxes took a little serching to find the same make and model of boxes i found the kobalt brand lowes sells are larger than others i obtained a box that is 30in high 24in deep and 48 in wide. i cut 4 inch holes on sides above bed rail and along front
if i could do it agine i would rivet them together due to my tig welding abilitys and the clear coat on the aluminum makes it hard to clean and get a good looking weld i will post pics as soon as i can. i am going to atempt a smaller one for the quad when im done all post that later thanks for looking anderson1394
**** i picked up both boxes off of craigslist.com for 100$ used the box dezee makes sells for 800$and mine is bigger in size and a whole lot less cash*****
if i could do it agine i would rivet them together due to my tig welding abilitys and the clear coat on the aluminum makes it hard to clean and get a good looking weld i will post pics as soon as i can. i am going to atempt a smaller one for the quad when im done all post that later thanks for looking anderson1394
**** i picked up both boxes off of craigslist.com for 100$ used the box dezee makes sells for 800$and mine is bigger in size and a whole lot less cash*****