BigGameHoundsmen.com

I have a bluetick with a big 'ol head as well as a Duncan that is getting bigger by the day . I'd like to put round holes in my new box , how big should I cut them ?

6" or trace a 1 gallon coffee or paint can.

catdogs is right, any bigger than 6" , and a puppy will surely get out!

Thanks guys . Coffee can it is .

I used a 1 gal plastic paint bucket and affixed the lip and about 2 inches of the bucket to the hole. If it starts raining hard or I want to close the holes I just put the lids on.

matthew74 great tip thanks for sharing with us.

Here is a pic of my atv box with the bucket lips in the holes. It also makes a smooth surface for their heads when sticking out and the lids pop right on if you want them closed.

Mathew74 what are the deminsions of that atv box, and what material did you use its a nice box, I would like tto make one simalier. Thanks for the help

Houndcrazy93. I made it out of 1/2" plywood. Its not fancy aluminum like some but works great for me. Plus it only cost about $75 total with the hardware and herculiner. The dimensions are. 18"w x 40"L x 24"H. I ripped down some 2x4s to make the inside frame for strength. Let me know if you have any questions.
Matt

ok i will thanks for the help