Modifying a icom radio

[Budd Denny]

I came across a icom 2200h and what do I have to do with it so I can run marine channels on it?

[lippy]

Good evening,

All i have done is the alinco dr 135. But if you go to radio mods dk for a small donation you can get any mod you want.

[cat and bear]

Budd, if you dont find it there, i got a copy I can fax or send over to you, LOL

[bigboarstopper]

http://www.mods.dk/view.php?ArticleId=3192

its the banwith RX an TX expantion. If the window dosent open for you tell the tv repairman or whomever is going to do it to remove the surface mount diode D13 and D11. The two diodes are very close together.

[wanchese]

glad i read this post, i was getting ready to pay some one to mod my Yaesu ft-2900, clicked on that link and it told me how to do it step by step and even had pictures of which places to desolder. thanks for the link bigboarstopper

[Budd Denny]

http://www.mods.dk/view.php?ArticleId=3192

its the banwith RX an TX expantion. If the window dosent open for you tell the tv repairman or whomever is going to do it to remove the surface mount diode D13 and D11. The two diodes are very close together.

Is this something I can do? Do they just plug into the board?

[wanchese]

http://www.mods.dk/view.php?ArticleId=3192

its the banwith RX an TX expantion. If the window dosent open for you tell the tv repairman or whomever is going to do it to remove the surface mount diode D13 and D11. The two diodes are very close together.

Is this something I can do? Do they just plug into the board?

i found these for the mod you need, MOD DK will only let me veiw one article a day. worldwidedx has a little bit better pics

http://www.hampedia.net/icom/ic-2200h-mod-for-extended-range.php


http://www.worldwidedx.com/icom/58689-icom2200h-mod-extended-receive-transmit-range.html

[Budd Denny]

Budd, if you dont find it there, i got a copy I can fax or send over to you, LOL

I think I can get it Ron, thanks anyway. Has it been windy there .

[bigboarstopper]

http://www.mods.dk/view.php?ArticleId=3192

its the banwith RX an TX expantion. If the window dosent open for you tell the tv repairman or whomever is going to do it to remove the surface mount diode D13 and D11. The two diodes are very close together.

Is this something I can do? Do they just plug into the board?

I took mine to the local tv repair shop with a copy of this page describing the modification. Cost me 20 bucks. I certainly didnt wanna pull my new radio apart and poke around in there.