Loose antenna on the DC30

[Neff]

will someone walk me through tightening the antenna on the dc30 or does it have to be sent in.

Thanks

[timothy]

remove the 4 corner screws on the back of the battery pack there is a rubber boot over tha antenna connection. pull it off, a screw holds the antenna down. Tighten screw.

[haynhogdogger]

Neff,

Sorry for the late reply!

You do not have to loosen the four corner screws as stated above. Just remove the 2 screws that secure the backing plate>Remove backing plate and lift off collar from the 2 backing plate mounting poles>This will reveal the rubber boot that is covering the antenna mounting screw remove boot and snug up screw and youre done.

Put back in reverse order hope this helped if you didnt already do it.

Aloha!