adding collars to tri tronics classic 70

dirtydan · Post by **dirtydan** » Sat Sep 24, 2011 5:02 pm

I have a classic 70 exp and need to know how to link my extra collars to the unit.

South Texan · Post by **South Texan** » Sat Sep 24, 2011 5:49 pm

dirtydan wrote:I have a classic 70 exp and need to know how to link my extra collars to the unit.

Put the intensity level dial on the transmitter to a number (1,2,3,4,5,or6) doesnt' make any difference.
Match the color of the collar strap to the same color of button on the transmitter. Turn the collar on, as the collar is blinking, press and hold the on/off switch down. At the same time press and hold down the button on your transmitter that matches your collar. Hold your collar and transmitter buttons down, at the same time, from 5 to 10 seconds, you will hear one long beep and then two shorter beeps and then the collar will turn off. They should be matched up. To double check, turn the collar back on then press the button on the transmitter. If it matched up the light on your collar should light up when the button on your transmitter is pressed down. Hope this is understandable. Robbie

dirtydan · Post by **dirtydan** » Sat Sep 24, 2011 7:41 pm

That worked on one. The other is ffrom an older classic 70 and was turned on and off from the transmitter will this older one still work on the new model

South Texan · Post by **South Texan** » Sat Sep 24, 2011 11:20 pm

Dirtydan,

I can't answer that on the second one. I would just try to add it, like you did the first one and see what happens. I don't beleive it will hurt anything even if it doesn't match up.
If it is an exp collar, I don't see why it wouldn't work.
Robbie

dirtydan · Post by **dirtydan** » Mon Sep 26, 2011 1:30 pm

Robbie,
I guess what I was getting at is that my older collar needed to be turned on from the transmitter itself in which I have lost. So now I have no way of using the on/off switch in the process of linking to my new unit that the on off switch is on the actual collar. I appreciate the help as I am far from advanced when it comes to technology.

South Texan · Post by **South Texan** » Mon Sep 26, 2011 5:03 pm

Dirtydan,

I understand now what your talking about. No, I don't think this older collar is going to match up with your new transmitter. It has to be a EXP (expandable) collar in order to link or match up to the transmitter. Sorry this one didn't work. Robbie

adding collars to tri tronics classic 70

adding collars to tri tronics classic 70

Re: adding collars to tri tronics classic 70

Re: adding collars to tri tronics classic 70

Re: adding collars to tri tronics classic 70

Re: adding collars to tri tronics classic 70

Re: adding collars to tri tronics classic 70